Concrete Washout Bag | Low-Profile FIBC With PE Liner

Concrete Washout Bag | Low-Profile FIBC With PE Liner
Product Introduction:
HAOSENCE concrete washout bags give concrete truck drivers, pump operators and site crews a simple way to handle washout waste on site. Place the bag under the chute or pump hopper, wash out as normal, and the slurry and wash water stay contained inside the woven bag and its PE inner liner. Once...
Send Inquiry
Description
Technical Parameters

HAOSENCE concrete washout bags give concrete truck drivers, pump operators and site crews a simple way to handle washout waste on site. Place the bag under the chute or pump hopper, wash out as normal, and the slurry and wash water stay contained inside the woven bag and its PE inner liner. Once the contents have set solid, the bag is lifted by forklift and taken offsite for disposal or recycling. Nothing runs into the ground or down the drain, and there is no tray to clean afterwards.

Concrete washout bag with fitted PE inner liner - low profile FIBC construction

Washout water contained inside the PE liner.

How It Works

  1. Position: place the bag under the concrete truck chute, pump hopper or washdown point.
  2. Wash out: flush the chute, hoses and equipment into the bag. The PE liner holds the slurry and washout water inside the woven shell.
  3. Let it set: the cement residue hardens inside the bag. The bag must only be lifted once the waste has gone solid.
  4. Lift and remove: lift with the four corner loops by forklift and take the bag offsite for disposal, recycling or reuse.

Concrete washout bag collecting washout water through the top opening

Product Features

  • Low profile: sits flat under truck chutes and pump hoppers, with a wide top opening for easy washdown
  • PE inner liner: contains slurry and washout water during use and keeps the woven shell clean
  • Heavy woven PP shell: 100% virgin polypropylene, UV stabilised, with reinforced corner lifting loops for forklift handling
  • Easy to store and transport: supplied flat on pallets, so a stack of bags takes up little space on site
  • Made to order: size, fabric weight, liner and printing are built around your washdown setup

Concrete washout bag lifted by forklift with corner loops

Typical Specifications (Made to Order)

Item Specification
Product Concrete washout bag / concrete slurry containment bag
Safe Working Load (SWL) 2500KGS
Dimensions 175X105X40CM  183X111X45CM
Capacity 0.7CBM
Top opening Wide opening sized to suit the chute or hopper
Liner PE Liner
Fabric 100% virgin PP woven fabric, UV stabilised
Lifting 4 corner loops for forklift lifting; lift only once contents have set solid
Printing Custom logo and handling instructions available

Typical Applications

  • Washout waste from ready-mix and agitator trucks on construction sites
  • Concrete pump hoppers, chutes and pipeline flushing
  • Shotcrete and concrete placement equipment clean-up
  • Civil, road and commercial construction projects where a permanent or excavated washout area is not practical
  • Precast yards and batching plants managing daily washout

Concrete washout bag filled with set concrete slurry on construction site

Once the contents have set, the bag and its solidified waste can often be reused on site as a carpark wall, low retaining wall or site compound, or sent to a concrete recycler with the construction waste.

Quality and Testing

HAOSENCE (ZIBO HAOSENCE PACKAGING CO., LTD.) is an ISO 9001:2015 certified FIBC manufacturer. Washout bags are made from 100% virgin polypropylene and checked before dispatch. Sample bags and third-party test reports are available on request, so you can confirm the specification against your project's waste management requirements.

Concrete washout bags in production at HAOSENCE FIBC workshop

FAQ

1. Can the bag be lifted while the slurry is still wet?
No. Lift only once the washout waste has set solid. The corner loops are rated for the bag plus its solidified contents, and we will confirm the safe working load for your project.

2. What sizes are available?
Bags are made to order. Send us your chute or hopper dimensions and the volume you need to contain, and we will come back with a drawing and specification.

3. Is the liner leak-proof?
The fitted PE liner is made to contain washout water and slurry during use. As with any washout bag, place it on level ground away from sharp objects and check it before use.

4. Does a washout bag make our site compliant?
A washout bag supports your site's concrete waste controls, but compliance always depends on how the bag is used and disposed of under your project's environmental requirements. We can provide specification and test documentation to support your own approval process.

5. What happens to the bag after use?
Once set, bags are commonly sent to a concrete recycler or disposed of with construction waste. Many sites also reuse the set bags for carpark walls, low retaining walls or site compounds.

Need concrete washout bags for your projects, or looking to supply them to civil and construction sites? Send us your quantity and target specification and we will reply with a drawing, specification and quotation.

 

Hot Tags: concrete washout bag | low-profile fibc with pe liner, China concrete washout bag | low-profile fibc with pe liner manufacturers, suppliers

Send Inquiry
ZIBO HAOSENCE PACKAGING CO.,LTD
We have been expanding our production scale every year to meet customers' fastest delivery time.
contact us